HERMA PE white tc (851)/62Xpc/517

Label material

HERMA PE white tc (851)
White, glossy polyethylene film with topcoat

Adhesives

Adhesive 62Xpc
Permanent, transparent acrylic based adhesive

Release liner

HERMA PW (517)
White, supercalendered glassine

Product information

Self-adhesive Material - Issue 02.2024

PDF download
Request price

Service Information

Useable width Net width Minimum quantity in m2 Stock goods Provisioning Time
1,523 /  2,000 mm
×

Available net widths

2,000 lm/roll
1,520 m²
×

The following articles are in stock

2,000 lm/roll 166 250 333
Quantity for best utilization of pallet: Please select a width
within one day

Self-adhesive Material

HERMA PE white tc (851)/62Xpc/517

Grammage approx. 156 g/m² ISO 536
Total caliper approx. 143 µm ISO 534
Service temperature -30 to 60 °C up to 95 °C for short periods

Application and use

Thanks to its special topcoat the glossy surface of HERMA PE white tc gives a good print quality in conventional printing processes like e.g. UV flexo printing.

HERMA PE white tc can be used to produce visually demanding, glossy, non-transparent labels. For recycling reasons these labels are preferably used on PE surfaces.

Thanks to the high flexibility of this material even curved surfaces and deformable packaging may be labelled without any problems.

 

The adhesive 62Xpc is specially developed for filmic face material. Through the use of 2-layer technology and ideally optimised layers, the conversion properties become excellent and the adhesion properties are above average. A good wettability combined with a high transparency of the adhesive layer give a visually appealing result. Once applied the adhesive is insensitive against humidity, soaps and oil and therefore suits specially well for product labelling in hygiene and cosmetic industry. It features good resistance to light, heat and aging.

The supercalendered glassine is perfectly suited for assignment in labelling machines equipped with optical or mechanical scanners.

Processing

Excellent die-cutting characteristics on all customary machines. As part of a self-adhesive compound HERMA PW (517) offers excellent die-cutting characteristics with all customary flatbed and rotary die-cutting tools.

Storage conditions

Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.

The shelf life is two years from date of production.

Regulations concerning contact with food

HERMA PE white tc complies with Regulation (EC) No. 1935/2004 and (EU) No. 10/2011 on plastics and articles intended to come into contact with food. 

All ingredients of adhesive 62Xpc comply with recommendations BfR XIV or FDA 21 CFR 175.105 (Adhesives).

The pressure-sensitive adhesive 62Xpc can be safely used for the back coating of labels for labelling of foodstuffs for storage at room temperature or below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 3 in accordance with Regulation (EU) No. 10/2011. With regard to the results of the formulation evaluation and the migration analyses it can be derived that the adhesive grade does not have a harmful effect on the content of blood bags and that the requirements of the standard mentioned above are met in this case (EN ISO 3826-1 "Plastics Collapsible Containers for Human Blood and Blood Components, Part 1: Conventional containers, Paragraph 8.5 label requirements"). Declaration of no objection valid until 18.08.2024

The paper liner complies with recommendation BfR XXXVI.

Label material

HERMA PE white tc (851)

White, glossy polyethylene film with topcoat

Grammage approx. 80 g/m² ISO 536
Caliper approx. 80 µm ISO 534
Tensile stress (MD) approx. 20 N/mm² ISO 527
Tensile stress (CD) approx. 21 N/mm² ISO 527
Surface gloss 60° GU approx. 75 GU ISO 2813
Opacity approx. 80 % ISO 2471

Adhesives

Adhesive 62Xpc

Permanent, transparent acrylic based adhesive

Tack high
Peel adhesion high
Shear extremely high

Release liner

HERMA PW (517)

White, supercalendered glassine

Grammage approx. 58 g/m² ISO 536
Caliper approx. 49 µm ISO 534
Tensile strength (MD) approx. 76 N/15 mm DIN 53112
Tensile strength (CD) approx. 38 N/15 mm DIN 53112
Transparency approx. 49 % DIN 53147

Disclaimer

All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0