HERMA PE Laser (800)
White, matt, opaque polyethylene film, highly filled with non-abrasive silicates, suitable for laser printers
Product information - Label material - Issue 01.2014
|Grammage||approx. 116 g/m²||ISO 536|
|Caliper||approx. 178 µm||ISO 534|
|Tensile stress MD||approx. 10 N/mm²||ISO 527|
|Tensile stress CD||approx. 5 N/mm²||ISO 527|
|Opacity||approx. 95,00 %||ISO 2471|
Available as a standard with the following adhesives:
Application and use
HERMA PE laser has been specially designed for laser printers. Printing tests showed excellent results both with monochrome and colour laser printing. In order to avoid soiling of printers due to adhesive bleed, we recommend use of protected edges only, i.e. original edges of the semi-finished rolls should not be adopted for sheet-stock. A possible curvature in machine direction (especially towards the cores) may be ad-justed by a decurl bar in the press. In combination with suitable inks the matt surface of HERMA PE laser offers an excellent quality of imprint with all customary printing methods. Best results in flexo printing may be achieved by employing water or solvent based inks. Label sheets produced from HERMA PE laser are particularly suitable for product marking (e.g. for labelling pallets or barrels). In combination with our UV acrylic adhesive 64B, HERMA PE laser complies with all requirements of BS 5609/II (resistance to sea water).
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0, Fax +49 (0) 711 7702-381