Product information
Adobe PDF-Format

HERMA PE white (850)

White, glossy, polyethylene film with corona pretreatment

Product information - Label material - Issue 03.2012

Grammageapprox. 81 g/m²ISO 536
Caliperapprox. 82 µmISO 534
Tensile stress MDapprox. 19 N/mm²ISO 527
Tensile stress CDapprox. 19 N/mm²ISO 527
Surface gloss Angle: 60° to the perpendicularapprox. 68 %DIN 67530
Opacityapprox. 81,00 %ISO 2471

Available as a standard with the following adhesives:

Application and use

The glossy surface of HERMA PE white with its corona pretreatment on one side offers an excellent quality of the imprint in screen, letterpress and flexo printing. Before printing we recommend to freshen up the corona pretreatment. HERMA PE white is perfect for the production of optically pretentious, glossy, non-transparent labels. For recycling reasons these labels are preferably used on PE surfaces. Thanks to the high flexibility of this material even curved surfaces may be labelled without any problems.

Regulations concerning contact with food

This film complies with the legal requirements of the European Regulation on Consumer Goods*, of the Plastic Directive**, of the regulation on good manufacturing practice*** as well as to the requirements of the German Lebensmittel-, Bedarfsgegenstände- und Futtermittelgesetzbuch**** (Foodstuffs, Consumer Goods and Animal Feed Code) concerning materials and articles intended to come into contact with food. The verification of suitability for the intended purpose and risk management measures are subject to the one who puts the final product into circulation. All statements correspond to the current state of our knowledge and are based on information of our raw material suppliers. * Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food ** Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food *** Regulation (EC) No 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food **** LFGB §§ 30 und §§ 31 (Official gazette No 63 of 17.09.1997)


All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0, Fax +49 (0) 711 7702-381

Recent news

Bright prospects for matt surface finish

New self-adhesive inkjet label material from HERMA

Useful label calculator