Product information
Adobe PDF-Format

HERMA PE white tc (851)

White, glossy polyethylene film with topcoat

Product information - Label material - Issue 09.2015

Grammageapprox. 82 g/m²ISO 536
Caliperapprox. 82 µmISO 534
Tensile stress MDapprox. 20 N/mm²ISO 527
Tensile stress CDapprox. 16 N/mm²ISO 527
Surface gloss Angle: 60° to the perpendicularapprox. 75 GUDIN 67530
Opacityapprox. 80,00 %ISO 2471

Available as a standard with the following adhesives:

Application and use

Thanks to its special treatment the glossy surface of HERMA PE white tc offers an excellent quality of the imprint in screen, letterpress and flexo printing. HERMA PE white tc is perfect for the production of optically pretentious, glossy, non-transparent labels. For recycling reasons these labels are preferably used on PE surfaces. Thanks to the high flexibility of this material even curved surfaces may be labelled without any problems.

In combination with our UV acrylic adhesive 62B the film complies with BS 5609/II (resistance to sea water) and is thus also suitable for labelling containers destined for trans-portation via sea route.

Regulations concerning contact with food

This film complies with the legal requirements of the European Regulation on Consumer Goods*, of the regulation on good manufacturing practice** as well as to the requirements of the German Lebensmittel-, Bedarfsgegenstände- und Futtermittelgesetzbuch*** (Foodstuffs, Consumer Goods and Animal Feed Code) concerning materials and articles intended to come into contact with food. The topcoat complies with the CEPE raw material exclusion list and is manufactured by the raw material suppliers according to the "EuPIA-Guidline on Printing Inks applied to the non-food contact surface of food packaging". It is pointed out that any contact between topcoat and food must be avoided. The verification of suitability for the intended purpose and risk management measures are subject to the one who puts the final product into circulation. All statements correspond to our current state of knowledge and are based on information of our raw material suppliers. * Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food ** Regulation (EC) No 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food *** LFGB §§ 30 und §§ 31 (Official gazette No 63 of 17.09.1997)


All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0, Fax +49 (0) 711 7702-381

Recent news

Great for the climate – and for dwindling resource

More secure orders, more convenient processing

Printing perfect labels right from the start