HERMA PE transparent (860)
Transparent, glossy polyethylene film with corona pretreatment
Product information - Label material - Issue 04.2012
|Grammage||approx. 77 g/m²||ISO 536|
|Caliper||approx. 82 µm||ISO 534|
|Tensile stress MD||approx. 20 N/mm²||ISO 527|
|Tensile stress CD||approx. 18 N/mm²||ISO 527|
|Surface gloss Angle: 60° to the perpendicular||approx. 85 %||DIN 67530|
|Transparency||approx. 93 %||DIN 53147|
Available as a standard with the following adhesives:
Application and use
The glossy surface of HERMA PE transparent with its corona pretreatment on one side offers an excellent quality of the imprint in screen, letterpress and flexo printing. Before printing we recommend to freshen up the corona pretreatment. HERMA PE transparent is perfect for the production of optically pretentious, glossy, transparent labels. For recycling reasons these labels are preferably used on PE surfaces. Thanks to the high flexibility of this material even curved surfaces may be labelled without any problems.
Regulations concerning contact with food
This film complies with the legal requirements of the European Regulation on Consumer Goods*, of the Plastic Directive**, of the regulation on good manufacturing practice*** as well as to the requirements of the German Lebensmittel-, Bedarfsgegenstände- und Futtermittelgesetzbuch**** (Foodstuffs, Consumer Goods and Animal Feed Code) concerning materials and articles intended to come into contact with food. The verification of suitability for the intended purpose and risk management measures are subject to the one who puts the final product into circulation. All statements correspond to the current state of our knowledge and are based on information of our raw material suppliers. * Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food ** Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food *** Regulation (EC) No 2023/2006 on good manufacturing practice for materials and articles intended to come into contact with food **** LFGB §§ 30 und §§ 31 (Official gazette No 63 of 17.09.1997)
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0, Fax +49 (0) 711 7702-381