Product information
Adobe PDF-Format

HERMA PE white matt (870)

White, matt polyethylene film with topcoat

Product information - Label material - Issue 04.2012

Grammageapprox. 84 g/m²ISO 536
Caliperapprox. 82 µmISO 534
Tensile stress MDapprox. 19 N/mm²ISO 527
Tensile stress CDapprox. 21 N/mm²ISO 527
Opacityapprox. 82,00 %ISO 2471

Available as a standard with the following adhesives:

Application and use

The matt surface of HERMA PE white matt offers an excellent quality of the imprint in all traditional printing methods.The matt surface coat has been particularly designed for imprint with thermo transfer printers after production and gives excellent printing results. For this application we recommend wax/resin or resin ribbons. HERMA PE white matt is perfect for the production of optically pretentious, non-transparent labels. For recycling reasons these labels are preferably used on PE surfaces. Thanks to the high flexibility of this material even curved surfaces may be labelled without any problems.

Regulations concerning contact with food

This film complies with the legal requirements of the European Regulation on Consumer Goods*, of the regulation on good manufacturing practice** as well as to the requirements of the German Lebensmittel-, Bedarfsgegenstände- und Futtermittelgesetzbuch*** (Foodstuffs, Consumer Goods and Animal Feed Code) concerning materials and articles intended to come into contact with food. The topcoat complies with the CEPE raw material exclusion list and is manufactured by the raw material suppliers according to the "EuPIA-Guidline on Printing Inks applied to the non-food contact surface of food packaging". It is pointed out that any contact between topcoat and food must be avoided. The verification of suitability for the intended purpose and risk management measures are subject to the one who puts the final product into circulation. All statements correspond to our current state of knowledge and are based on information of our raw material suppliers. * Regulation (EC) No 1935/24 on materials and articles intended to come into contact with food ** Regulation (EC) No 223/26 on good manufacturing practice for materials and articles intended to come into contact with food *** LFGB §§ 3 und §§ 31 (Official gazette No 63 of 17.9.1997)


All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0, Fax +49 (0) 711 7702-381

Recent news

Great for the climate – and for dwindling resource

More secure orders, more convenient processing

Printing perfect labels right from the start