Product information
Adobe PDF-Format

HERMA PP 50 transparent tc (885)

Transparent, glossy, biaxially oriented polypropylene film with topcoat

Product information - Label material - Issue 04.2017

Specifications
Grammageapprox. 46 g/m²ISO 536
Caliperapprox. 50 µmISO 534
Tensile stress MDapprox. 110 N/mm²ISO 527
Tensile stress CDapprox. 230 N/mm²ISO 527
Surface gloss Angle: 60° to the perpendicularapprox. 137 GUISO 2813
Transparencyapprox. 93 %DIN 53147

Available as a standard with the following adhesives:

Application and use

Thanks to its special surface treatment the glossy surface of HERMA PP 50 transparent tc offers an excellent quality of the imprint in all traditional printing methods. The primer on the back ensures perfect anchorage of the adhesive. Thus this product is perfect for any application demanding removability of the label. HERMA PP 50 transparent tc is perfect for the production of optically pretentious, glossy labels. For recycling reasons these labels are preferably used on PP surfaces. HERMA PP 50 transparent tc is particularly suitable for labelling cosmetic products, cleaning agents etc. as well as for applications demanding resistance to chemicals or weather.

Regulations concerning contact with food

HERMA PP 50 transparent tc is in compliance with the current relevant legal requirements of Regulation (EC) No.1935/2004 (not with Article 5) and Regulation (EC) No. 2023/2006. The base film has been manufactured only with monomers and additives that are authorized in Regulation (EU) No. 10/2011 and subsequent amendments up to Reg. 2016/1416/EU. Also the monomers and additives used for the manufacturing of the coating are either listed in Reg. 10/2011/EU or in EU Member States legislation or have been risk assessed and comply with Article 3.1 a of Reg.1935/2004/EU.
Therefore the film is suitable for direct food contact (any long time storage at room temperature or below, including heating up to 70 °C for 2 h or 100 °C for 15 min).

All statements correspond to our current state of knowledge and are based on information of our raw material suppliers.
The verification of suitability for the intended purpose and risk management measures are subject to the one who puts the final product into circulation.

Disclaimer

All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.

HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0, Fax +49 (0) 711 7702-381

Recent news

11.05.2017
International sales team reinforced

26.04.2017
Produce your own seawater-resistant labels

24.04.2017
Reliable application and enhanced strength