|Grammage||approx. 75 g/m²||ISO 536|
|Caliper||approx. 55 µm||ISO 534|
|Tensile stress MD||approx. 120 N/mm²||ISO 527|
|Tensile stress CD||approx. 160 N/mm²||ISO 527|
|Opacity||approx. 86,00 %||ISO 2471|
Available as a standard with the following adhesives:
Application and use
Thanks to its special treatment the matt surface of HERMA PETP white matt laser offers an excellent print quality in screen, letterpress and flexo printing. The film may also be printed with laser printers and it is possible to write on the film with ballpoint pens, pencils etc. HERMA PETP white matt laser suits perfectly for production of labels that have to be resistant to high temperature and moist environment (e.g. type plates). In combination with our acrylic adhesive 62Z the film complies with BS 5609/II (resistance to sea water) and is thus also suitable for labelling containers destined for transportation via sea route.
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0, Fax +49 (0) 711 7702-381